home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Original Shareware 1.1
/
The Original Shareware (WeMake CDs)(Volume 1.1)(CDs, Inc)(1993).iso
/
36
/
dvsetup.zip
/
README
< prev
next >
Wrap
Text File
|
1988-02-03
|
2KB
|
45 lines
The enclosed files are my DesqView 2.0 files. They have been working well
for me for several months now.
A few notes that you should be aware of, that may effect whether these files
are usable by you, unmodified:
1) my hardware consists of:
An IDS 286 Turbo, with 512k on the motherboard
An AST RAMPage card, with 2meg
A CGA video card
The rest of my hardware is irrelevant as far as DV is concerned.
2) I am running node 1 & 2 in the low 640k, with it split evenly between the
2 nodes.
Node 3 is run in the 'high' memory, with the partition size set for 220k
and swapable.
Nodes 1 & 2 are set (as they MUST be) unswapable.
3) Your available memory partition size has a direct relationship with the
amount of memory on your motherboard (less is better) and the type of
video card(s) you have in the system (CGA is better, EGA is best, Mono
is a disaster!) See the appendix of your DesqView manual for explanation.
The enclosed files are as follows:
P1-PIF.DVP = node #1 PCBoard
P2-PIF.DVP = node #2 PCBoard
P3-PIF.DVP = node #3 PCBoard (local node only)
S1-PIF.DVP = node #1 PCBSetUp
S2-PIF.DVP = node #2 PCBSetUp
S3-PIF.DVP = node #3 PCBSetUp
SM-PIF.DVP = PCBSystemManager
PM-PIF.DVP = PCBMoni
These files are NOT copyrighted, per QuarterDeck and can be copied and
shared at will.
Art Gentry
SysOp - The Bedroom BBS
816-637-4183